Start with this unit. Watch the product video to learn more details
Basic parameters
Model: HMB-X01-36
Product introduction: Integrated grille anti-glare polarized lens blackboard light, uniform light output, precise light output angle. The entire lamp is formed in one piece from extruded aluminum profile, with sandblasted oxidation treatment on the surface. The end caps at both ends are PC injection molded, and the polarized lens and light source module are embedded in the guide grooves of the lamp body. It has advantages such as stable structure, good heat dissipation for the light source, low lumen depreciation over long-term use, and long service life. An anti-glare baffle is provided in the line of sight direction, avoiding glare interference for teachers and students during use. The installation angle of the entire lamp can be flexibly adjusted, and grooves are provided to allow adjustment of the installation position to both sides.
Executive standards:
Executive standards:
Executive standards:
National standard GB 50034-2013 "Standard for lighting design of buildings",
GB 7793-2010 "Hygienic standard for day lighting and artificial lighting for middle and elementary school"
GB40070-2021 "Hygienic requirements for myopia prevention and control of children and adolescents' learning products"
GB/T 5700-2008 "Measurement methods for lighting"
GB 50034-2013 "Standard for lighting design of buildings"
DB44/T 2335-2021 Technical specification for classroom lighting in primary and secondary schools
GB 7793-2010 Hygienic standard for daylighting and artificial lighting of classrooms in primary and secondary schools
GB/T 36876-2018 Hygienic requirements for lighting design and installation of general classrooms in primary and secondary schools
GB/T 31831-2015 Technical requirements for application of LED indoor lighting
GB 50099-2011 Code for design of primary and secondary schools
IEEE Std 1789-2015 IEEE Recommended Practices for Modulating Current in High-Brightness
LEDs for Mitigating Health Risks to Viewers
DB44/T 2335-2021 Technical specification for classroom lighting in primary and secondary schools
Photoelectric parameters
| Rated voltage: | AC220-240V/50-60Hz | Color rendering index: | ≥95 |
| Rated power: | 36W | Special color rendering index R9 | ≥90 |
| Power factor: | ≥0.95 | Rated luminous flux | ≥2800Lm |
| 6000-hour lumen maintenance rate | ≥97% | Luminaire efficacy: | ≥85Lm/W |
| IP protection rating | IP40 | Light source specifications | 2835 0.5WSTM |
| Blue light hazard level | Rg0 (exempt group) | Light source brand | Shenzhen Refond Optoelectronics |
| Flicker | No hazard, no significant effect | Light source power | 192*0.5W module |
| Unified glare rating UGR for classroom lighting | <16 (measured in classroom lighting) | Color temperature: | 5000K±100K |
| Power supply: | Isolated constant current power supply | Color tolerance | ≤5 |
| Maintained average illuminance (desktop) | (Standard classroom 9+3 solution) ≥400Lx | Color fidelity | ≥90 |
| Illuminance uniformity (desktop) | ≥0.7 | Lighting power density of standard classroom (excluding blackboard light) | ≤7W/M2 |
| Lamp lifespan: | ≥30000 hours | Packaging method: | 6-piece pack |
| Standard classroom installation solution (≤64M2) | - | Packaging specifications: | 40*4035CM |
| Warranty period | 5 years | Protection against electric shock class: | Class II |
| Installation method: | Pendant rod mounting | Pendant rod diameter | Ø10MM |
| Certification standards | CCC certification, GB40070-2021 "Hygienic requirements for myopia prevention and control of children and adolescents' learning supplies" | ||
